HOT-MELT GLUING EQUIPMENT

THERMO-PLASTIC CEMENTING MACHINE
Model
820-600(1000)

Description

Features & Perfomance

  1. This m/c is suitable for cementing of 0.5mm thickness or over plane workpiece such as: footwears, leatherwares, leather bag, stationery, paper board boxes & sportwares etc.,
  2. 上膠輪上直接加熱之創新設計,可使膠均勻熱熔上膠,對於各種工件均可均勻上膠。
  3. The innovation designs of directively heating on cementing roller which can be thermo-cemented evenly, anyhow, workpiece can be cemented equally.
  4. The thermo-plastic tunnel has treated by telfon, convenient for cementing change, the cementing roller & tunnel can be heated individually, especially, due to thermo-plastic character to adjust the cementing temp, Otherly, the thermo-plastic can be avoided carbonizied.
  5. This m/c be installed inverter and the cementing speed can be adjusted in stepless and also installed forward/reverse switches, which employed reverse backwarded workpiece in failure or in short of cementing volume during in processing, assured of workiece quality.

Specifications

Model YC-820-600 YC-820-1000
Power 1 HP 1HP
Electric heating 10.4kw 10.4kw
Cementing width 600mm 1000mm
Revolution speed 0~86 rpm steples varispeed 0~86 rpm steples varispeed
N.W./G.W. 414kgs/480kgs 625kg/700kg
Machine size 1070x620x1350mm 1450x620x1650mm
Measurement 1150x720x1300 1550x720x1300mm

*Our company reserves the right to modify the specifications & dimensions. If those are subjected to change, without prior notice.